Rebuilding vs. Restoration | Grand Piano Regulation

Every week, I speak with at least a couple of people who are interested in not giving up on their older piano, but rather bringing it back to a playable condition. There are two ways to do this: Rebuilding and Restoration. Both attempt to restore the piano to its former glory, but the philosophy behind them differs.

Rebuilding can involve anything from an action overhaul to replacement of soundboard, strings, and pin block. Where possible, new parts are used. I say where possible because while the industry became standardized around the 1920s, pianos prior to that often have parts for which it is impossible to find replacements.

For example, we are doing a rebuild right now for a client in Albany, a piano from 1909. The hammer butts and hammer assemblies are able to be replaced, but the whippens (the mechanism which transfers the energy from the key to the hammer assembly) are non-standard and must be reconditioned by cleaning and by replacing leather and felt where possible. 

Rebuilding often gives the best musical results, as newer parts are often superior. However, some people want their piano as true to the original as possible. That is where restoration comes in.

Restoration seeks to use the original parts and historically accurate materials. This will reproduce, as closely as possible, the aesthetic of the time in which the piano was built. This route is most often reserved for pianos which have great historical or sentimental value. It is often cheaper to replace parts than it is to recondition them, as reconditioning is extremely labor-intensive. Thus, the cost of historical restoration of a piano can exceed that of rebuilding by a fair amount.

Get More Info : Grand Piano Regulation

Website : https://www.newyorkpianoworks.com/

Contact Us : Piano Humidity Control

Rebuilding vs. Restoration | Piano Finish Repair

Every week, I speak with at least a couple of people who are interested in not giving up on their older piano, but rather bringing it back to a playable condition. There are two ways to do this: Rebuilding and Restoration. Both attempt to restore the piano to its former glory, but the philosophy behind them differs.

Rebuilding can involve anything from an action overhaul to replacement of soundboard, strings, and pin block. Where possible, new parts are used. I say where possible because while the industry became standardized around the 1920s, pianos prior to that often have parts for which it is impossible to find replacements.

For example, we are doing a rebuild right now for a client in Albany, a piano from 1909. The hammer butts and hammer assemblies are able to be replaced, but the whippens (the mechanism which transfers the energy from the key to the hammer assembly) are non-standard and must be reconditioned by cleaning and by replacing leather and felt where possible. 

Rebuilding often gives the best musical results, as newer parts are often superior. However, some people want their piano as true to the original as possible. That is where restoration comes in.

Restoration seeks to use the original parts and historically accurate materials. This will reproduce, as closely as possible, the aesthetic of the time in which the piano was built. This route is most often reserved for pianos which have great historical or sentimental value. It is often cheaper to replace parts than it is to recondition them, as reconditioning is extremely labor-intensive. Thus, the cost of historical restoration of a piano can exceed that of rebuilding by a fair amount.

Get More Info : Piano Finish Repair

Website : https://www.newyorkpianoworks.com/

Contact Us : Piano Humidity Control

Important Keywords : Grand Piano Regulation, Grand Piano Repair, Piano Regulation And Voicing, Piano Repair, Piano Restoration, PianoDisc Installation, PianoDisc Repair, Historical Keyboards, Wessell Nickel and Gross, WNG, Polyester Piano finish repair

Why Tune My Piano? | Piano Restoration

It may surprise you to learn this, but most of the time you can’t tell if your piano is in tune or not! While most people can hear the gross inharmony of a badly out unison, the piano usually goes out of tune in a more subtle way. 

Pianos fluctuate in pitch with changes in humidity (and extreme changes in temperature). This is why all piano manufacturers recommend that your piano be tuned AT LEAST twice a year. It is normal for your piano to go out of tune with these seasonal changes. Here is a brief description of what happens:

In winter, the air is drier, and this is compounded by indoor heat, which further dries out the air. This causes the wood in the piano - and there is a LOT of wood - to release its moisture and shrink. This causes the piano to go flat, sometimes to a surprising degree. The reverse happens in the warmer months: the soundboard, ribs, and wooden action parts all swell with the increased humidity, which (among other things) increases the pressure of the bridge on the strings, forcing the piano sharp.

These changes often happen in a uniform manner across the keyboard. The whole piano will drop or rise, and sound “in tune” with itself. So why should you get the piano tuned if it sounds pretty much ok? Three reasons. First, having the piano be at the proper pitch is essential for stability of the tuning. The piano being out of tune can make the piano go further out of tune, resulting in additional expense the next visit from your technician. Second, while tuning the piano, various minor repairs and adjustments can be made before they become a problem! New York Piano Works assumes that we will be making repairs and adjustments for 10-15 minutes each visit, and this is accounted for in the cost of a standard tuning. (If you are not using us, check with your technician to see if they include this necessary aspect of piano care. Third, and most important, having the piano at the wrong pitch makes making music less enjoyable - and can actually damage your sense of what is an “in tune” note. When I was teaching, I had a student (high school) who consistently sang 10-20 cents flat. I couldn’t figure out why this was (and we couldn’t correct it) until one day I went to his home and lo and behold, there was an extremely flat piano in the living room! It had altered his innate sense of pitch. A piano at the wrong pitch doesn’t resonate as well, as they are designed to function optimally at the correct pitch.

Get More Info : Piano Restoration

Website : https://www.newyorkpianoworks.com/

Contact Us : PianoDisc Repair

Why Tune My Piano? | PianoDisc Repair

It may surprise you to learn this, but most of the time you can’t tell if your piano is in tune or not! While most people can hear the gross inharmony of a badly out unison, the piano usually goes out of tune in a more subtle way. 

Pianos fluctuate in pitch with changes in humidity (and extreme changes in temperature). This is why all piano manufacturers recommend that your piano be tuned AT LEAST twice a year. It is normal for your piano to go out of tune with these seasonal changes. Here is a brief description of what happens:

In winter, the air is drier, and this is compounded by indoor heat, which further dries out the air. This causes the wood in the piano - and there is a LOT of wood - to release its moisture and shrink. This causes the piano to go flat, sometimes to a surprising degree. The reverse happens in the warmer months: the soundboard, ribs, and wooden action parts all swell with the increased humidity, which (among other things) increases the pressure of the bridge on the strings, forcing the piano sharp.

These changes often happen in a uniform manner across the keyboard. The whole piano will drop or rise, and sound “in tune” with itself. So why should you get the piano tuned if it sounds pretty much ok? Three reasons. First, having the piano be at the proper pitch is essential for stability of the tuning. The piano being out of tune can make the piano go further out of tune, resulting in additional expense the next visit from your technician. Second, while tuning the piano, various minor repairs and adjustments can be made before they become a problem! New York Piano Works assumes that we will be making repairs and adjustments for 10-15 minutes each visit, and this is accounted for in the cost of a standard tuning. (If you are not using us, check with your technician to see if they include this necessary aspect of piano care. Third, and most important, having the piano at the wrong pitch makes making music less enjoyable - and can actually damage your sense of what is an “in tune” note. When I was teaching, I had a student (high school) who consistently sang 10-20 cents flat. I couldn’t figure out why this was (and we couldn’t correct it) until one day I went to his home and lo and behold, there was an extremely flat piano in the living room! It had altered his innate sense of pitch. A piano at the wrong pitch doesn’t resonate as well, as they are designed to function optimally at the correct pitch.

Get More Info : Polyester Piano finish repair

Website : https://www.newyorkpianoworks.com/

Contact Us : PianoDisc Repair 

Service your action today | Historical Keyboards PianoDisc Installation

One of the most often performed and most necessary things one can do to a piano is to have the action serviced. The benefits, compared to the cost, result in great value and a noticeable improvement in the performance of your piano.

Action Servicing involves three procedures: Cleaning the action, tightening all screws, and lubricating action centers. The procedure takes about an hour. 

Cleaning is the first step. The action is removed from the piano, dust and debris are blown out with compressed air (outside of course), and the action is wiped down with cleaning solution and a microfiber cloth.

Next, we tighten all the screws. In an upright piano action, that’s well over 200 screws! We tighten hammer butt screws, whippen screws, action frame screws, and damper screws. In a grand action there are fewer screws: Action frame screws, Hammer flange screws, and whippen screws.

Finally, we lubricate the moving parts. Most pivot points in piano actions are comprised of pins that ride inside cloth bushings. The lubricant that we use clears out dust and debris, lubricates the pivot point, and protects it from future damage. In an upright piano, we lubricate hammer butt flanges, damper flanges, whippen flanges and jack flanges, as well as balance rail pins. In a grand piano we lubricate hammer flanges, whippen flanges, jack flanges, and balance rail pins.

Action servicing should be done every three to five years, depending on usage and environmental conditions. In addition to making the piano play more efficiently and with less extraneous noise, servicing the action also affords the technician an opportunity to examine each of the many moving parts, and correct minor problems before they become major and costly ones. Make an appointment today!

Get More Info : Historical Keyboards

Website : https://www.newyorkpianoworks.com/

Contact Us : PianoDisc Installation

Service your action today | Piano Regulation And Voicing

One of the most often performed and most necessary things one can do to a piano is to have the action serviced. The benefits, compared to the cost, result in great value and a noticeable improvement in the performance of your piano.

Action Servicing involves three procedures: Cleaning the action, tightening all screws, and lubricating action centers. The procedure takes about an hour. 

Cleaning is the first step. The action is removed from the piano, dust and debris are blown out with compressed air (outside of course), and the action is wiped down with cleaning solution and a microfiber cloth.

Next, we tighten all the screws. In an upright piano action, that’s well over 200 screws! We tighten hammer butt screws, whippen screws, action frame screws, and damper screws. In a grand action there are fewer screws: Action frame screws, Hammer flange screws, and whippen screws.

Finally, we lubricate the moving parts. Most pivot points in piano actions are comprised of pins that ride inside cloth bushings. The lubricant that we use clears out dust and debris, lubricates the pivot point, and protects it from future damage. In an upright piano, we lubricate hammer butt flanges, damper flanges, whippen flanges and jack flanges, as well as balance rail pins. In a grand piano we lubricate hammer flanges, whippen flanges, jack flanges, and balance rail pins.

Action servicing should be done every three to five years, depending on usage and environmental conditions. In addition to making the piano play more efficiently and with less extraneous noise, servicing the action also affords the technician an opportunity to examine each of the many moving parts, and correct minor problems before they become major and costly ones. Make an appointment today! 

Get More Info : Piano Regulation And Voicing

Website : https://www.newyorkpianoworks.com/

Contact Us : PianoDisc Installation

Why It’s Important to Tune Your Piano | Grand Piano Regulation

There are around 230 strings on the average piano. Each string on the piano has a unique pitch and frequency that must be tuned to the other strings. The sound quality of your piano is determined by these strings, so they must be maintained properly. Due to stress, these strings can stretch over time, causing the piano to become out of tune. Seasonal Changes in humidity also cause the piano to become out of tune.

When pianos are tuned regularly, they are easier to tune, stay in good condition, and maintain their value. Piano tuning regularly also avoids damage caused by overstretched strings. It will be more expensive and time-consuming to get a piano back into tune if it hasn't been tuned in a long time.

If a piano hasn't been tuned in a long time, a piano tuner may attempt to correct the problem by raising the piano's pitch. This involves pulling all of the strings, resulting in a sharp pitch. When the strings naturally stretch over time, causing the pitch to go flat, this overcompensation should keep the piano in tune.

You should have your piano checked every six months to a year to ensure that the strings last as long as possible. If the strings are damaged too much or the keys are not properly working, you should take a piano repair service. 

If you buy a new piano, you should tune it four times in the first year since the new strings stretch more and go out of tune more quickly. If you tune your piano regularly throughout the first few years of ownership, it will be more likely to stay in tune for longer periods of time and during the later years of its life.

Get More Info : Polyester Piano finish repair

Website ; https://www.newyorkpianoworks.com/

Contact Us : Historical Keyboards